Shutdown manager

To apply shutdown management operations:

• select user computers;

• click the “Shutdown” button in the “Control” toolbar;

• in the Shutdown Manager, select desired operation and click the “Yes” button;

• if “Forced” option is selected, the operation will be applied in “forced” style - without any prompts on the user's computers to save documents, close programs, etc.;

• Note: the “Wake-up” command works only when:

  • The Wake-up on LAN (WOL) feature is enabled in the CMOS BIOS Setup of each user computer. Most often this feature may be found in the Power Management Setup section of the CMOS BIOS Setup program as “Wake-up on LAN”, “WOL”, “Resume by PCI” or “Resume by Network Adapter” option. For more information about enabling WOL feature for the computer, please refer to your computer or motherboard's user guide.

  • Network adapter must support Wake-up On LAN feature.

  • Net Control 2 must have performed a connection to the computer at least once. During first connection, the Administrator module records the MAC address of the computer's network adapter, which is required for WOL feature.